- π Compatibility- Designed for Pass Through RJ45 Connectors Cat6 Cat6a Cat5 Cat5e ends. You can use it to efficiently cut, strip, crimp and trim network cables. It’s a great tool for a networking professional and any DIY networking enthusiast as well.
- π Precise Crimping Die-set- The die-set that matches the pins of an RJ45 connector precisely .The Ethernet Crimper work by pierces the wires insulation and fix the wires into the RJ45 connectors for a strong modular connections.
- π non-slip grip- The grip is ergonomically designed to let you hold it tightly for enhanced the precision of crimping. And it can hold it only one hand and work good during cutting, stripping and crimping as well.
- π RJ45 Cat6 Cat5 Connectors for 24-26 AWG cables- The RJ45 connector is for terminating cat6 cat5 cat5e UTP twisted pair network cable; Supports both solid and stranded cable; max insulated outside diameter of the wire: 1.10 mm.
- π Network Cable Tester- The RJ45 tester can test both of the RJ11, RJ12 telephones cable and RJ45 Ethernet LAN cables RJ45 cat6 cat6a cat5 cat5e Cat7 network cables. And it will help you to check whether the cables are paired and connected correctly or not.
Product Description
Features:
-All-in-one pass-thru modular wire crimper for cutting, stripping, and crimping.
-Compactness makes it easier to handle and store compared to other crimping tools.
-Ergonomic design for a less fatiguing grip, especially when crimping for a prolonged period.
-Crimping pass through RJ45 connector ends cat6 cat6a cat5 cat5e.
-Comes with cat6 PASS THROUGH rj45 connector with storage jar, rj45 cable tester, wire cutter, 100x black cable tie, Mini wire stripper.
|
|
|
|
|
|---|---|---|---|
50X CAT6 RJ45 CONNECTORSupport for cat6 cat5 cat5e cable AWG24-26 network cable.the wires pass all the way through the front of the rj45 plug. The each pair can be pulled closer to the contacts than conventional plugs. |
RJ45 RJ11 NETWORK TESTER2 sets of 8 LED lights that correspond to the 8 pins on the transmitting and receiving end of the Ethernet cable. There will also be a G light for the ground. |
WIRE CUTTERMade of hardened stainless steel and high temperature forging, make it sharp and easy to cut the wires. |
100X BLACK CABLE TIESPerfect for cable or wire organized and binding; Keeping Cables Neat & Tidy. |
How to use:
– You need to buy a 9v battery and install it on the tester. (the battery is not included in the package.)
– Put cables into both main tester and remote tester.
– Turn on the master unit by sliding over the switch to either
ON = Normal test mode
S = Slow automatic mode
– The tester now checks each of the 8 wires one after the other.
If wired correctly the sequence on both the master and remote unit will be lightοΌ
1-2-3-4-5-6-7-8, G light is for shielded Ethernet.
Following are abnormal connections:
1. If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not light on.
2. If several cables are not connected (3 or more), none of the lights is on.
3. If two ends of a cable is disordered, for example NO. 2 and NO. 4, then displays on: Main tester: 1-2-3-4-5-6-7-8 / remote tester: 1-4-3-2-5-6-7-8